Overview
Complete and reliable information about disturbances in the primary and/or in the secondary system together with continuous event-logging is accomplished by the “Disturbance report” functionality.
For more detailed information on “Disturbance report” function, refer to ABB, Relion 670 Series manuals.
To see other supported functions, click here.
Function Identification
| Function description | IEC 61850 identification |
IEC 60617 identification |
ANSI/IEEE C37.2 device number |
| Disturbance report | DRPRDRE | – | – |
| Disturbance report | A1RADR – A4RADR | – | – |
| Disturbance report | B1RBDR – B22RBDR | – | – |
Signals & Setting Parameters
DRPRDRE function block
DRPRDRE Output signals
| DRPRDRE Output signals | |||
| Name | Type | Description | |
| DRPOFF | BOOLEAN | Disturbance report function turned off | |
| RECSTART | BOOLEAN | Disturbance recording started | |
| RECMADE | BOOLEAN | Disturbance recording made | |
| CLEARED | BOOLEAN | All disturbances in the disturbance report cleared | |
| MEMUSED | BOOLEAN | More than 80% of memory used | |
DRPRDRE Non group settings (basic)
| DRPRDRE Non group settings (basic) | |||||
| Name | Values (Range) | Unit | Step | Default | Description |
| Operation | Off On |
– | – | Off | Operation Off/On |
| PreFaultRecT | 0.05 – 9.90 | s | 0.01 | 0.10 | Pre-fault recording time |
| PostFaultRecT | 0.1 – 10.0 | s | 0.1 | 0.5 | Post-fault recording time |
| TimeLimit | 0.5 – 10.0 | s | 0.1 | 1.0 | Fault recording time limit |
| PostRetrig | Off On |
– | – | Off | Post-fault retrig enabled (On) or not (Off) |
| MaxNoStoreRec | 10 – 100 | – | 1 | 100 | Maximum number of stored disturbances |
| ZeroAngleRef | 1 – 30 | Ch | 1 | 1 | Trip value recorder, phasor reference channel |
| OpModeTest | Off On |
– | – | Off | Operation mode during test mode |
| SetInfoInDRep | Disable Enable |
– | – | Enable | Enable Disturbance report settings functionality |
DRPRDRE Monitored data
| DRPRDRE Monitored data | ||||
| Name | Type | Values (Range) | Unit | Description |
| MemoryUsed | INTEGER | – | % | Memory usage (0-100%) |
| UnTrigStatCh1 | BOOLEAN | – | – | Under level trig for analog channel 1 activated |
| OvTrigStatCh1 | BOOLEAN | – | – | Over level trig for analog channel 1 activated |
| UnTrigStatCh2 | BOOLEAN | – | – | Under level trig for analog channel 2 activated |
| OvTrigStatCh2 | BOOLEAN | – | – | Over level trig for analog channel 2 activated |
| UnTrigStatCh3 | BOOLEAN | – | – | Under level trig for analog channel 3 activated |
| OvTrigStatCh3 | BOOLEAN | – | – | Over level trig for analog channel 3 activated |
| UnTrigStatCh4 | BOOLEAN | – | – | Under level trig for analog channel 4 activated |
| OvTrigStatCh4 | BOOLEAN | – | – | Over level trig for analog channel 4 activated |
| UnTrigStatCh5 | BOOLEAN | – | – | Under level trig for analog channel 5 activated |
| OvTrigStatCh5 | BOOLEAN | – | – | Over level trig for analog channel 5 activated |
| UnTrigStatCh6 | BOOLEAN | – | – | Under level trig for analog channel 6 activated |
| OvTrigStatCh6 | BOOLEAN | – | – | Over level trig for analog channel 6 activated |
| UnTrigStatCh7 | BOOLEAN | – | – | Under level trig for analog channel 7 activated |
| OvTrigStatCh7 | BOOLEAN | – | – | Over level trig for analog channel 7 activated |
| UnTrigStatCh8 | BOOLEAN | – | – | Under level trig for analog channel 8 activated |
| OvTrigStatCh8 | BOOLEAN | – | – | Over level trig for analog channel 8 activated |
| UnTrigStatCh9 | BOOLEAN | – | – | Under level trig for analog channel 9 activated |
| OvTrigStatCh9 | BOOLEAN | – | – | Over level trig for analog channel 9 activated |
| UnTrigStatCh10 | BOOLEAN | – | – | Under level trig for analog channel 10 activated |
| OvTrigStatCh10 | BOOLEAN | – | – | Over level trig for analog channel 10 activated |
| UnTrigStatCh11 | BOOLEAN | – | – | Under level trig for analog channel 11 activated |
| OvTrigStatCh11 | BOOLEAN | – | – | Over level trig for analog channel 11 activated |
| UnTrigStatCh12 | BOOLEAN | – | – | Under level trig for analog channel 12 activated |
| OvTrigStatCh12 | BOOLEAN | – | – | Over level trig for analog channel 12 activated |
| UnTrigStatCh13 | BOOLEAN | – | – | Under level trig for analog channel 13 activated |
| OvTrigStatCh13 | BOOLEAN | – | – | Over level trig for analog channel 13 activated |
| UnTrigStatCh14 | BOOLEAN | – | – | Under level trig for analog channel 14 activated |
| OvTrigStatCh14 | BOOLEAN | – | – | Over level trig for analog channel 14 activated |
| UnTrigStatCh15 | BOOLEAN | – | – | Under level trig for analog channel 15 activated |
| OvTrigStatCh15 | BOOLEAN | – | – | Over level trig for analog channel 15 activated |
| UnTrigStatCh16 | BOOLEAN | – | – | Under level trig for analog channel 16 activated |
| OvTrigStatCh16 | BOOLEAN | – | – | Over level trig for analog channel 16 activated |
| UnTrigStatCh17 | BOOLEAN | – | – | Under level trig for analog channel 17 activated |
| OvTrigStatCh17 | BOOLEAN | – | – | Over level trig for analog channel 17 activated |
| UnTrigStatCh18 | BOOLEAN | – | – | Under level trig for analog channel 18 activated |
| OvTrigStatCh18 | BOOLEAN | – | – | Over level trig for analog channel 18 activated |
| UnTrigStatCh19 | BOOLEAN | – | – | Under level trig for analog channel 19 activated |
| OvTrigStatCh19 | BOOLEAN | – | – | Over level trig for analog channel 19 activated |
| UnTrigStatCh20 | BOOLEAN | – | – | Under level trig for analog channel 20 activated |
| OvTrigStatCh20 | BOOLEAN | – | – | Over level trig for analog channel 20 activated |
| UnTrigStatCh21 | BOOLEAN | – | – | Under level trig for analog channel 21 activated |
| OvTrigStatCh21 | BOOLEAN | – | – | Over level trig for analog channel 21 activated |
| UnTrigStatCh22 | BOOLEAN | – | – | Under level trig for analog channel 22 activated |
| OvTrigStatCh22 | BOOLEAN | – | – | Over level trig for analog channel 22 activated |
| UnTrigStatCh23 | BOOLEAN | – | – | Under level trig for analog channel 23 activated |
| OvTrigStatCh23 | BOOLEAN | – | – | Over level trig for analog channel 23 activated |
| UnTrigStatCh24 | BOOLEAN | – | – | Under level trig for analog channel 24 activated |
| OvTrigStatCh24 | BOOLEAN | – | – | Over level trig for analog channel 24 activated |
| UnTrigStatCh25 | BOOLEAN | – | – | Under level trig for analog channel 25 activated |
| OvTrigStatCh25 | BOOLEAN | – | – | Over level trig for analog channel 25 activated |
| UnTrigStatCh26 | BOOLEAN | – | – | Under level trig for analog channel 26 activated |
| OvTrigStatCh26 | BOOLEAN | – | – | Over level trig for analog channel 26 activated |
| UnTrigStatCh27 | BOOLEAN | – | – | Under level trig for analog channel 27 activated |
| OvTrigStatCh27 | BOOLEAN | – | – | Over level trig for analog channel 27 activated |
| UnTrigStatCh28 | BOOLEAN | – | – | Under level trig for analog channel 28 activated |
| OvTrigStatCh28 | BOOLEAN | – | – | Over level trig for analog channel 28 activated |
| UnTrigStatCh29 | BOOLEAN | – | – | Under level trig for analog channel 29 activated |
| OvTrigStatCh29 | BOOLEAN | – | – | Over level trig for analog channel 29 activated |
| UnTrigStatCh30 | BOOLEAN | – | – | Under level trig for analog channel 30 activated |
| OvTrigStatCh30 | BOOLEAN | – | – | Over level trig for analog channel 30 activated |
| UnTrigStatCh31 | BOOLEAN | – | – | Under level trig for analog channel 31 activated |
| OvTrigStatCh31 | BOOLEAN | – | – | Over level trig for analog channel 31 activated |
| UnTrigStatCh32 | BOOLEAN | – | – | Under level trig for analog channel 32 activated |
| OvTrigStatCh32 | BOOLEAN | – | – | Over level trig for analog channel 32 activated |
| UnTrigStatCh33 | BOOLEAN | – | – | Under level trig for analog channel 33 activated |
| OvTrigStatCh33 | BOOLEAN | – | – | Over level trig for analog channel 33 activated |
| UnTrigStatCh34 | BOOLEAN | – | – | Under level trig for analog channel 34 activated |
| OvTrigStatCh34 | BOOLEAN | – | – | Over level trig for analog channel 34 activated |
| UnTrigStatCh35 | BOOLEAN | – | – | Under level trig for analog channel 35 activated |
| OvTrigStatCh35 | BOOLEAN | – | – | Over level trig for analog channel 35 activated |
| UnTrigStatCh36 | BOOLEAN | – | – | Under level trig for analog channel 36 activated |
| OvTrigStatCh36 | BOOLEAN | – | – | Over level trig for analog channel 36 activated |
| UnTrigStatCh37 | BOOLEAN | – | – | Under level trig for analog channel 37 activated |
| OvTrigStatCh37 | BOOLEAN | – | – | Over level trig for analog channel 37 activated |
| UnTrigStatCh38 | BOOLEAN | – | – | Under level trig for analog channel 38 activated |
| OvTrigStatCh38 | BOOLEAN | – | – | Over level trig for analog channel 38 activated |
| UnTrigStatCh39 | BOOLEAN | – | – | Under level trig for analog channel 39 activated |
| OvTrigStatCh39 | BOOLEAN | – | – | Over level trig for analog channel 39 activated |
| UnTrigStatCh40 | BOOLEAN | – | – | Under level trig for analog channel 40 activated |
| OvTrigStatCh40 | BOOLEAN | – | – | Over level trig for analog channel 40 activated |
| FaultNumber | INTEGER | – | – | Disturbance fault number |
A4RADR function block, derived analog inputs
A4RADR Input signals
| A4RADR Input signals | |||
| Name | Type | Default | Description |
| INPUT31 | REAL | 0 | Analog channel 31 |
| INPUT32 | REAL | 0 | Analog channel 32 |
| INPUT33 | REAL | 0 | Analog channel 33 |
| INPUT34 | REAL | 0 | Analog channel 34 |
| INPUT35 | REAL | 0 | Analog channel 35 |
| INPUT36 | REAL | 0 | Analog channel 36 |
| INPUT37 | REAL | 0 | Analog channel 37 |
| INPUT38 | REAL | 0 | Analog channel 38 |
| INPUT39 | REAL | 0 | Analog channel 39 |
| INPUT40 | REAL | 0 | Analog channel 40 |
A2RADR to A4RADR Non group settings (basic)
B1RBDR function block, binary inputs, example for B1RBDR – B22RBDR
B1RBDR Input signals
| B1RBDR Input signals | |||
| Name | Type | Default | Description |
| INPUT1 | BOOLEAN | 0 | Binary channel 1 |
| INPUT2 | BOOLEAN | 0 | Binary channel 2 |
| INPUT3 | BOOLEAN | 0 | Binary channel 3 |
| INPUT4 | BOOLEAN | 0 | Binary channel 4 |
| INPUT5 | BOOLEAN | 0 | Binary channel 5 |
| INPUT6 | BOOLEAN | 0 | Binary channel 6 |
| INPUT7 | BOOLEAN | 0 | Binary channel 7 |
| INPUT8 | BOOLEAN | 0 | Binary channel 8 |
| INPUT9 | BOOLEAN | 0 | Binary channel 9 |
| INPUT10 | BOOLEAN | 0 | Binary channel 10 |
| INPUT11 | BOOLEAN | 0 | Binary channel 11 |
| INPUT12 | BOOLEAN | 0 | Binary channel 12 |
| INPUT13 | BOOLEAN | 0 | Binary channel 13 |
| INPUT14 | BOOLEAN | 0 | Binary channel 14 |
| INPUT15 | BOOLEAN | 0 | Binary channel 15 |
| INPUT16 | BOOLEAN | 0 | Binary channel 16 |
B2RBDR to B22RBDR Input signals
B1RBDR Non group settings (basic)
| B1RBDR Non group settings (basic) | |||||
| Name | Values (Range) | Unit | Step | Default | Description |
| TrigDR01 | Off On |
– | – | Off | Trigger operation On/Off |
| SetLED01 | Off Start Trip Start and Trip |
– | – | Off | Set LED on HMI for binary channel 1 |
| TrigDR02 | Off On |
– | – | Off | Trigger operation On/Off |
| SetLED02 | Off Start Trip Start and Trip |
– | – | Off | Set LED on HMI for binary channel 2 |
| TrigDR03 | Off On |
– | – | Off | Trigger operation On/Off |
| SetLED03 | Off Start Trip Start and Trip |
– | – | Off | Set LED on HMI for binary channel 3 |
| TrigDR04 | Off On |
– | – | Off | Trigger operation On/Off |
| SetLED04 | Off Start Trip Start and Trip |
– | – | Off | Set LED on HMI for binary channel 4 |
| TrigDR05 | Off On |
– | – | Off | Trigger operation On/Off |
| SetLED05 | Off Start Trip Start and Trip |
– | – | Off | Set LED on HMI for binary channel 5 |
| TrigDR06 | Off On |
– | – | Off | Trigger operation On/Off |
| SetLED06 | Off Start Trip Start and Trip |
– | – | Off | Set LED on HMI for binary channel 6 |
| TrigDR07 | Off On |
– | – | Off | Trigger operation On/Off |
| SetLED07 | Off Start Trip Start and Trip |
– | – | Off | Set LED on HMI for binary channel 7 |
| TrigDR08 | Off On |
– | – | Off | Trigger operation On/Off |
| SetLED08 | Off Start Trip Start and Trip |
– | – | Off | Set LED on HMI for binary channel 8 |
| TrigDR09 | Off On |
– | – | Off | Trigger operation On/Off |
| SetLED09 | Off Start Trip Start and Trip |
– | – | Off | Set LED on HMI for binary channel 9 |
| TrigDR10 | Off On |
– | – | Off | Trigger operation On/Off |
| SetLED10 | Off Start Trip Start and Trip |
– | – | Off | Set LED on HMI for binary channel 10 |
| TrigDR11 | Off On |
– | – | Off | Trigger operation On/Off |
| SetLED11 | Off Start Trip Start and Trip |
– | – | Off | Set LED on HMI for binary channel 11 |
| TrigDR12 | Off On |
– | – | Off | Trigger operation On/Off |
| SetLED12 | Off Start Trip Start and Trip |
– | – | Off | Set LED on HMI for binary channel 12 |
| TrigDR13 | Off On |
– | – | Off | Trigger operation On/Off |
| SetLED13 | Off Start Trip Start and Trip |
– | – | Off | Set LED on HMI for binary channel 13 |
| TrigDR14 | Off On |
– | – | Off | Trigger operation On/Off |
| SetLED14 | Off Start Trip Start and Trip |
– | – | Off | Set LED on HMI for binary channel 14 |
| TrigDR15 | Off On |
– | – | Off | Trigger operation On/Off |
| SetLED15 | Off Start Trip Start and Trip |
– | – | Off | Set LED on HMI for binary channel 15 |
| TrigDR16 | Off On |
– | – | Off | Trigger operation On/Off |
| SetLED16 | Off Start Trip Start and Trip |
– | – | Off | Set LED on HMI for binary channel 16 |
| FunType1 | 0 – 255 | – | 1 | 0 | Function type for binary channel 1
(IEC -60870-5-103) |
| InfNo1 | 0 – 255 | – | 1 | 0 | Information number for binary channel 1 (IEC -60870-5-103) |
| FunType2 | 0 – 255 | – | 1 | 0 | Function type for binary channel 2
(IEC -60870-5-103) |
| InfNo2 | 0 – 255 | – | 1 | 0 | Information number for binary channel 2 (IEC -60870-5-103) |
| FunType3 | 0 – 255 | – | 1 | 0 | Function type for binary channel 3
(IEC -60870-5-103) |
| InfNo3 | 0 – 255 | – | 1 | 0 | Information number for binary channel 3 (IEC -60870-5-103) |
| FunType4 | 0 – 255 | – | 1 | 0 | Function type for binary channel 4 (IEC -60870-5-103) |
| InfNo4 | 0 – 255 | – | 1 | 0 | Information number for binary channel 4 (IEC -60870-5-103) |
| FunType5 | 0 – 255 | – | 1 | 0 | Function type for binary channel 5
(IEC -60870-5-103) |
| InfNo5 | 0 – 255 | – | 1 | 0 | Information number for binary channel 5 (IEC -60870-5-103) |
| FunType6 | 0 – 255 | – | 1 | 0 | Function type for binary channel 6 (IEC -60870-5-103) |
| InfNo6 | 0 – 255 | – | 1 | 0 | Information number for binary channel 6 (IEC -60870-5-103) |
| FunType7 | 0 – 255 | – | 1 | 0 | Function type for binary channel 7
(IEC -60870-5-103) |
| InfNo7 | 0 – 255 | – | 1 | 0 | Information number for binary channel 7 (IEC -60870-5-103) |
| FunType8 | 0 – 255 | – | 1 | 0 | Function type for binary channel 8 (IEC -60870-5-103) |
| InfNo8 | 0 – 255 | – | 1 | 0 | Information number for binary channel 8 (IEC -60870-5-103) |
| FunType9 | 0 – 255 | – | 1 | 0 | Function type for binary channel 9 (IEC -60870-5-103) |
| InfNo9 | 0 – 255 | – | 1 | 0 | Information number for binary channel 9 (IEC -60870-5-103) |
| FunType10 | 0 – 255 | – | 1 | 0 | Function type for binary channel 10 (IEC -60870-5-103) |
| InfNo10 | 0 – 255 | – | 1 | 0 | Information number for binary channel 10 (IEC -60870-5-103) |
| FunType11 | 0 – 255 | – | 1 | 0 | Function type for binary channel 11 (IEC -60870-5-103) |
| InfNo11 | 0 – 255 | – | 1 | 0 | Information number for binary channel 11 (IEC -60870-5-103) |
| FunType12 | 0 – 255 | – | 1 | 0 | Function type for binary channel 12 (IEC -60870-5-103) |
| InfNo12 | 0 – 255 | – | 1 | 0 | Information number for binary channel 12 (IEC -60870-5-103) |
| FunType13 | 0 – 255 | – | 1 | 0 | Function type for binary channel 13 (IEC -60870-5-103) |
| InfNo13 | 0 – 255 | – | 1 | 0 | Information number for binary channel 13 (IEC -60870-5-103) |
| FunType14 | 0 – 255 | – | 1 | 0 | Function type for binary channel 14 (IEC -60870-5-103) |
| InfNo14 | 0 – 255 | – | 1 | 0 | Information number for binary channel 14 (IEC -60870-5-103) |
| FunType15 | 0 – 255 | – | 1 | 0 | Function type for binary channel 15 (IEC -60870-5-103) |
| InfNo15 | 0 – 255 | – | 1 | 0 | Information number for binary channel 15 (IEC -60870-5-103) |
| FunType16 | 0 – 255 | – | 1 | 0 | Function type for binary channel 16 (IEC -60870-5-103) |
| InfNo16 | 0 – 255 | – | 1 | 0 | Information number for binary channel 16 (IEC -60870-5-103) |
B1RBDR Non group settings (advanced)
| B1RBDR Non group settings (advanced) | |||||
| Name | Values (Range) | Unit | Step | Default | Description |
| TrigLevel01 | Trig on 0 Trig on 1 |
– | – | Trig on 1 | Trigger on positive (1) or negative (0) slope for binary input 1 |
| IndicationMa01 | Hide Show |
– | – | Show | Indication mask for binary channel 1 |
| TrigLevel02 | Trig on 0 Trig on 1 |
– | – | Trig on 1 | Trigger on positive (1) or negative (0) slope for binary input 2 |
| IndicationMa02 | Hide Show |
– | – | Show | Indication mask for binary channel 2 |
| TrigLevel03 | Trig on 0 Trig on 1 |
– | – | Trig on 1 | Trigger on positive (1) or negative (0) slope for binary input 3 |
| IndicationMa03 | Hide Show |
– | – | Show | Indication mask for binary channel 3 |
| TrigLevel04 | Trig on 0 Trig on 1 |
– | – | Trig on 1 | Trigger on positive (1) or negative (0) slope for binary input 4 |
| IndicationMa04 | Hide Show |
– | – | Show | Indication mask for binary channel 4 |
| TrigLevel05 | Trig on 0 Trig on 1 |
– | – | Trig on 1 | Trigger on positive (1) or negative (0) slope for binary input 5 |
| IndicationMa05 | Hide Show |
– | – | Show | Indication mask for binary channel 5 |
| TrigLevel06 | Trig on 0 Trig on 1 |
– | – | Trig on 1 | Trigger on positive (1) or negative (0) slope for binary input 6 |
| IndicationMa06 | Hide Show |
– | – | Show | Indication mask for binary channel 6 |
| TrigLevel07 | Trig on 0 Trig on 1 |
– | – | Trig on 1 | Trigger on positive (1) or negative (0) slope for binary input 7 |
| IndicationMa07 | Hide Show |
– | – | Show | Indication mask for binary channel 7 |
| TrigLevel08 | Trig on 0 Trig on 1 |
– | – | Trig on 1 | Trigger on positive (1) or negative (0) slope for binary input 8 |
| IndicationMa08 | Hide Show |
– | – | Show | Indication mask for binary channel 8 |
| TrigLevel09 | Trig on 0 Trig on 1 |
– | – | Trig on 1 | Trigger on positive (1) or negative (0) slope for binary input 9 |
| IndicationMa09 | Hide Show |
– | – | Show | Indication mask for binary channel 9 |
| TrigLevel10 | Trig on 0 Trig on 1 |
– | – | Trig on 1 | Trigger on positive (1) or negative (0) slope for binary input 10 |
| IndicationMa10 | Hide Show |
– | – | Show | Indication mask for binary channel 10 |
| TrigLevel11 | Trig on 0 Trig on 1 |
– | – | Trig on 1 | Trigger on positive (1) or negative (0) slope for binary input 11 |
| IndicationMa11 | Hide Show |
– | – | Show | Indication mask for binary channel 11 |
| TrigLevel12 | Trig on 0 Trig on 1 |
– | – | Trig on 1 | Trigger on positive (1) or negative (0) slope for binary input 12 |
| IndicationMa12 | Hide Show |
– | – | Show | Indication mask for binary channel 12 |
| TrigLevel13 | Trig on 0 Trig on 1 |
– | – | Trig on 1 | Trigger on positive (1) or negative (0) slope for binary input 13 |
| IndicationMa13 | Hide Show |
– | – | Show | Indication mask for binary channel 13 |
| TrigLevel14 | Trig on 0 Trig on 1 |
– | – | Trig on 1 | Trigger on positive (1) or negative (0) slope for binary input 14 |
| IndicationMa14 | Hide Show |
– | – | Show | Indication mask for binary channel 14 |
| TrigLevel15 | Trig on 0 Trig on 1 |
– | – | Trig on 1 | Trigger on positive (1) or negative (0) slope for binary input 15 |
| IndicationMa15 | Hide Show |
– | – | Show | Indication mask for binary channel 15 |
| TrigLevel16 | Trig on 0 Trig on 1 |
– | – | Trig on 1 | Trigger on positive (1) or negative (0) slope for binary input 16 |
| IndicationMa16 | Hide Show |
– | – | Show | Indication mask for binary channel 16 |
B2RBDR to B22RBDR Non group settings (basic)
Logics & highlights
Disturbance report functions and related function blocks
Disturbance report structure
Example of number of recordings versus the total recording time
The recording times definition
Analog input function blocks
Technical Data
DRPRDRE technical data
