Siemens / “Circuit breaker” function group _ Setting & highlights _ SI5204

Overview

The “Circuit breaker” function group combines all the user functions that relate to a circuit breaker. It contains all of the protection, control, and supervision functions that you can use for this device type.

For more detailed information on “Circuit breaker” function group, refer to SIPROTEC 5 devices, V8.30 & higher manuals.

To see other supported function groups, click here.

Structure of the Circuit-Breaker Function Group

Setting Parameters

General setting parameters

Addr.	Parameter	C	Setting Options	Default Setting
Ref. for %-values
_:2311:101	General:Rated normal current		0.20 A to 100000.00 A	1000.00 A
_:2311:102	General:Rated voltage		0.20 kV to 1200.00 kV	400.00 kV
Breaker settings
_:2311:112	General:Current thresh. CB open	1 A @ 100 Irated	0.030 A to 10.000 A	0.100 A
		5 A @ 100 Irated	0.15 A to 50.00 A	0.50 A
		1 A @ 50 Irated	0.030 A to 10.000 A	0.100 A
		5 A @ 50 Irated	0.15 A to 50.00 A	0.50 A
		1 A @ 1.6 Irated	0.001 A to 1.600 A	0.100 A
		5 A @ 1.6 Irated	0.005 A to 8.000 A	0.500 A
_:2311:136	General:Op. mode BFP		unbalancing I> query	unbalancing

Setting parameters for Trip logic

Addr.	Parameter	C	Setting Options	Default Setting
Trip logic
_:103	Trip logic:Reset of trip command		with I< with I< & aux.contact with dropout	with I<

Setting parameters for Circuit breaker auxiliary contacts

Addr.	Parameter	C	Setting Options	Default Setting
Circuit break.
_:101	Circuit break.:Output time		0.02 s to 1800.00 s	0.10 s
_:105	Circuit break.:Indicat. of breaking values		with trip always	always

Setting parameters for Manual close detection

Addr.	Parameter	C	Setting Options	Default Setting
Manual close
_:101	Manual close:Action time		0.01 s to 60.00 s	0.30 s
_:102	Manual close:CB open dropout delay		0.00 s to 60.00 s	0.00 s